Insert Cross Dowels I in pre-drilled holes on inside of side rails. Vrbo Win VR This Is Book Early 30s Combo.
Cross bars – 2 4.
Step 2 Loft Bed With Doors Assembly Instructions. Each side rail needs 2 people to assembly put the bunk bed end panel on a straight line insert the side rail on end panel at the same time and set up hardware to assembly but not fully tighten set up another side rail hardware. Align and fasten triangle support panel L to headboard A and headboard leg B C using pan head screw 2 and tighten with screw driver not included. Plastic zip ties – 4 b.
2slide 3 dowels into bottom of caps on the a end and place on top of chest. To ensure the assembly process is as simple as possible our customer service team has offered these suggestions. Use 34 silver colored screws step 2 page 4.
Assembly Instructions Eli Tree House Loft Bed Full Please read all instructions before beginning assembly. The product assembly instructions will be listed. The Step2 Company LLC.
Side rails must be in upper position on top bunk assembly. Check to make sure you have all the parts listed in the Parts List above. The product assembly instructions will be listed.
Read the directions first and make sure that all of the necessary pieces are included in the box. Position 2 Footboards A and Side Rails C in approximate location where you want bed. Scroll down the product information page and click product details.
Click Assembly other documents to open tab. Prohibit horseplay on or under beds and prohibit jumping on the bed. Metal Bed Loft Assembly Instructions Step 1 Unfold lower loft assembly in upright position.
Lock washers – 3 e. 1 2 7 8 1PC 1PC 1PC 2PCS 2PCS 1PC Twin Loft Bed ASSEMBLY INSTRUCTIONS PART LIST PAGE 2 OF 7 Weight Limits. Top frame – 1 2.
Bed Loft Parts List 1. A center climbing ladder leads to the loft bed which fits a standard twin-size mattress not included. 220 lbs 3 6 9 10PCS 2PCS 1PC.
A pop-up will open with a link to Assembly other documents. If playback doesnt begin shortly. Click Assembly other documents to open tab.
Step 2 Top Bed Assembly. 1 bolts – 3 c. 0800 393159 Step2 UK website.
A pop-up will open with a link to Assembly other documents. View our selection and shop now. Higher rails allow for easy bed transition and security.
Repeat step on opposite bed end. CALLUM TWIN LOFT BED ASSEMBLY INSTRUCTIONS BUNK BED END ASSEMBLY INSTRUCTIONS STEP 1. Set one of the side rails in place against the mounting hole in the headboard.
Davids Step 2 Loft Storage Twin Bed – YouTube. See image below Step 2. Step 2 Align spring to desired slots in bed end.
2 Align fasten the pull to drawer front using screw and fully tighten with Phillips head screw driver NOT INCLUDED STEP 1. The fort loft assembly instructions 1attach the short cap mouldings c to the ends of one a end with the dowel holes down. Safety rail – 1 5.
Do NOT attach plastic zip ties until Step 8. If bunk bed will be placed next to a wall the guardrail that runs the full length of the bed should be placed against the wall to prevent entrapment between the bed and the wall. Flat washer 14 Bolt 14 x 17mm 4 pcs Philips Screwdriver Not included Bolt 516 x 110mm 12 pcs N.
Place headboard upside down on soft surfaceAlign and fasten headboard leg B C to headboard A using flat washer 6 lock washer 5 short bolt 3. Do not lock the screws of the bed slats to the outermost edge of the bed slats you need to leave a certain space at the edges RWKHUZLVH LW ZLOO FDXVH WKH ERDUG WR EUHDN 3PCS 11. Use ladder for entering and leaving upper bunk.
Step2 sells replacement parts for many of its plastic toys kids furniture and home garden products. This step varies widely but usually involves using a screw or bolt that passes through the headboard and into the side rail installed with a screwdriver or hex wrench. 5 1PCS 2PCS 1 7 3PCS 8 3PCS 9 12PCS 5 4 3PCS 4 7 7 1 8 Note.
2 Loft Storage Twin Bed TM 83428361 For assistance or replacement parts please contact. Place mattress and safety rail on spring. 3attach angle brackets as shown to secure end to chest.
Wing nuts – 3 d. Use 2 12 screws through holes marked with s. It features a large storage space side rails and a real wood look.
End sections – 2 left right 2. Allen key 1 pc V. The Step2 Girls Twin Loft Bed With Storage is designed to match todays interiors.
PART LIST HARDWARE LIST J. 28 pcs Barrel nut 516 12 pcs. Step 3 With two or more people grasp ends of upper unit and place onto lower unit fully seating connecting pins into bed ends.
STEP 2 ITEM. Attach it according to the instructions that came with your bed. See image below Step 2.
Scroll down the product information page and click product details. Attach side rails to bed ends by inserting 80mm Hex Bolt H into thru holes on bed ends. See image below Back to Customer services.
Prohibit more than one person on upper bunk.